Full figure The Hacker - CLOSED - Head by Caine - Maxis-Miniatures Paint App -

Custom One-Sixth Figures Forum

Help Support Custom One-Sixth Figures Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

IKE-CON

Super Freak
Premium Member
Joined
Sep 1, 2008
Messages
3,241
Reaction score
75
Location
Arizona
This project is one of my Grails, so I'm going to make it anyways.
And as always, I welcome anyone to join who's interested having this character.

Here is the cost breakdown for each part.
My PayPal: [email protected] Pay as friend.
Also make sure you put your forum id, real name and
shipping address in the notes of the payment

We'll stick to getting the basic figure and basic accessories
done.

Basic Full Figure $245.00 + Priority Flat Rate shipping with signature
requirement. (exact shipping cost due when package is shipped)

Painted head : $125.00, Painted by Maxis-Miniatures
AT025 body & hand set $30.00
Outfit: $90.00, Black T-shirt, Black Faded slim pants, Black Hoodie, shoes
Accessories: 8 different sized fsociety posters & EOTWP fliers.
Others may be available in the future.

Shipping prices Full Figure
Medium Flat Rate Boxes Domestic (U.S) : $16.10
Medium Flat Rate Boxes International : $
56.80

Shipping prices For head only
Small Flat Rate Boxes Domestic (U.S.) : $8.95
Small Flat Rate Boxes International : $30.70

All packages require signature for release

***** SHIPPED IN BLUE *****


Full FIgure
1) Jlacivita - ** Shipped & Delivered **
2) Tatony11 -** Shipped & Delivered **
3) Julie250 - ** Shipped & Delivered **
4) MayaSky - US unable to contact

5) Roborobz - ** SHIPPED & DELIVERED **

Head cost breakdown
:
Unpainted head $50
Painted Head $125

Head
1) Jlacivita -Unpainted Head - ** SHIPPED & DELIVERED **
2) john@yoyodyne -Painted Head -** SHIPPED & DELIVERED **
3) piem - Painted Head - ** SHIPPED & DELIVERED **



I casted up several versions of the head. Main version fits the
AT025 perfectly(neck peg down inside the body). That body is the perfect body
for this character: with it's narrow shoulders, thin chest and stellar shoulder articulation,
you can hunch the shoulders forward to create a look just like the character has in the series.

This head below is the final paint app by MM.

Rami 5.jpg


I also made posters(Fsociety, end of the world party shown below).
P1000553.JPG

P1000531.JPG


Hope you enjoy him, as much as I enjoy bringing this character to you.

Thanks
Ike
One Sixth Global
 
Last edited:
Absolutely still in. Full Figure.

I’d that hoodie in the photo final? Looks a little baggy.

Head is spot on!

I actaully really like how the hoodie fits. If you think it's baggy we
can always shrink to fit to the body. But keep in mind, when or if you put the hands
in the pockets, that pulls the material in a different way.

There are several ways we can go about it.

1) I can continue to source the Hoddie from the the guy who already makes them.
2) We can have Gheewhiz make one to be more form fitting.

I've also had an idea about the display. I would be interested to
see a white subway tile stand with white subway tile wall with counter.
Then we can put the Fsociety and end of world posters on the wall.
And put the polaroid camera, small bowling pin and mask sitting behind Elliot on the counter.
Like in the first video.

Any thoughts on that?
 
I actaully really like how the hoodie fits. If you think it's baggy we
can always shrink to fit to the body. But keep in mind, when or if you put the hands
in the pockets, that pulls the material in a different way.

Hands in pockets seems like the likely pose for Elliot, unless he's posed hacking or something.

I just looked at some stills from the show, and you're right the hoodie is actually pretty close to the movie. And if he puts his hands in the pockets and pushes his arms down, it definitely would tighten up.

8ED21E49-140C-4699-9975-7F7607F0953C.jpeg


I think it's the sculpted hair that's making the hood itself sit too high from his head.

Definitely don't want rooted hair... But given that hood-on is such an iconic look for the character, maybe let folks buy two headsculpts so they can dremel one down for the hood!

Also, it'd be great to get the zipper to be silver somehow, but that's a minor detail.

GeeWhiz is great, and have done a number of one offs for me (Max Fischer, BoJack). Is your current tailor similar in price/wait-time?

We could always organize a GeeWhiz run later if there's demand.

I've also had an idea about the display. I would be interested to
see a white subway tile stand with white subway tile wall with counter.
Then we can put the Fsociety and end of world posters on the wall.
And put the polaroid camera, small bowling pin and mask sitting behind Elliot on the counter.
Like in the first video.

Any thoughts on that?
I think the subway tile idea is great, although I tend to make my own backdrops for my figures, so ideally the floor and wall/counter would be separate.

For props, I honestly forget what the mini bowling pin was for... I need to rewatch. Mask & fsociety poster are definitely must haves!

Other props to consider.

1. Some kind of thumb drive, maybe with E*Corp logo (fun to pull off in 1/6!)
2. Laptop
3. Elliot's CD binder with all of his blackmail material on people he hacked... could close and open to just one page,[/QUOTE]
 
Hands in pockets seems like the likely pose for Elliot, unless he's posed hacking or something.

I just looked at some stills from the show, and you're right the hoodie is actually pretty close to the movie. And if he puts his hands in the pockets and pushes his arms down, it definitely would tighten up.

Also, it'd be great to get the zipper to be silver somehow, but that's a minor detail. ****Easy Fix****

GeeWhiz is great, and have done a number of one offs for me (Max Fischer, BoJack). Is your current tailor similar in price/wait-time?
******* Don't get me wrong, I love highend tailors, but this person works for a small company, doesn't make a lot of money and quality is good. I could easily sorce more. We could save a hundreds if we did the Hoodie and the Pants that way. ********* Then we can focus that toward more acessories or other items we want for the character ******** Originally I was going to make the complete figure
before hand, and I wanted to show we can make a highend type of figure for a reasonable price.


We could always organize a GeeWhiz run later if there's demand. *** True, we could, I wouldn't mind a Mr. Robot Jacket either***


I think the subway tile idea is great, although I tend to make my own backdrops for my figures, so ideally the floor and wall/counter would be separate.

For props, I honestly forget what the mini bowling pin was for... I need to rewatch. Mask & fsociety poster are definitely must haves!

Other props to consider.

1. Some kind of thumb drive, maybe with E*Corp logo (fun to pull off in 1/6!)
2. Laptop *** He is on so many different kinds of both Laptops and Desktops over the 4 seasons. So harder to nail down the "iconic" one.
3. Elliot's CD binder with all of his blackmail material on people he hacked.** Good Idea **.. could close and open to just one page,
[/QUOTE]
 
Cool, man, can't wait to see the prototype.

Def fine with sticking with your tailor, esp if he can do the silver zipper.
 
Just an update.
1) I sent heads away to Lonnie at H2 for casting.
2) Still waiting on response to see if I can get silver zipper on hoodie.
3) Eventually when DoggieDoc gets done on a few other projects he's doing, then we should see him start on accessories for this.
 
So go ahead and post in this thread if your still interested and what in: Head, Head & Clothes, Full Figure.
I will start making an official list.

Thanks
Ike
One Sixth GLobal
 
Last edited:
Updated 1st post.



On another note: who like me, would want the custom subway tile
wall/stand. It would be a wall with a counter to hold the small bowling pin, old poleroid camera, mask and a place to mount your posters.
I want to really go for some fine details like in this video. Or find the full version of the video and there is even more possible accessories, including an old IBM computer and some interesting books. I'm a detail and research hound, half the fun in doing a release, it's getting the little things right.
Again, no one has to , but I'm going to make or get that wall made.

What do you think?
 
Last edited:
Back
Top