Full figure The Hacker - CLOSED - Head by Caine - Maxis-Miniatures Paint App -

Custom One-Sixth Figures Forum

Help Support Custom One-Sixth Figures Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Still waiting on the casting to be finished. I'm doing all the heads
Caine did for me, so it's taking longer.

Also, not getting response from the Hoodie guy. So I
Am going to experiment with one and see how it truns out.
I will see how the steady my hand is trying to paint a hoodie zipper silver. =]

If it doesn't turn out well, then I will get Gheewhiz to make one.

I did however find embossed plastic sheets of white subway tile.
Not printed on paper like most of the others I've seen. You can run
your finger down a sheet and feel the tile.

I'm going to work on a stand with it, to see how it looks.

I'll take some pictures so you can see.
 
Last edited:
Im interested in the head depending on the price
 
Still waiting on the casting to be finished. I'm doing all the heads
Caine did for me, so it's taking longer.

Is there more than one head sculpt? If so, i'd love to see so i can decide if I want both!

Btw, please add me to the head-sculpt only list as well as the full figure list, i'm pretty sure I'll want an extra head to dremel down the hair for the hoodie.

I'll take some pictures so you can see.

Can't wait!
 
Castings are in. Subway tile sheets look pretty good and I was able to find an ultra fine silver sharpie. Take a look.
There are 3 types of heads: Long neck unaltered, med neck made to fit the worldbox AT025 body, which is perfect for character, and
finally a no neck version, made to fit smaller slim body necks (like Blitzway's Carlito body).
 

Attachments

  • P1000488.JPG
    P1000488.JPG
    873.7 KB · Views: 126
  • P1000499.JPG
    P1000499.JPG
    492.7 KB · Views: 121
  • P1000498.JPG
    P1000498.JPG
    746 KB · Views: 118
Last edited:
Looks great!

Is the AT025 w/ med neck what you photographed? I’ll do 1 full figure with that and an extra head (also med neck)
 
Yes, the one in the photo is the med neck on a AT025 body.

Here are the heads up close. The group on the right are the med neck ones. Marked slightly different
You don't see the marks, they are down in the neck hole when on the body.
 

Attachments

  • P1000483.JPG
    P1000483.JPG
    847.3 KB · Views: 94
I'm going to send a head off to a painter and then try to make the final prototype Build.
This will give you a better picture of what my vision is for this. Also if you like that paint app.

Doggie Doc still very busy, so I don't know when he'll be available to do the accessories. But it might end up
people just buying the accesory set well after the basic figure is done. I'll keep trying to see if any time slots open up..

Those insterested, after I show the final prototype, let me know if you want me to get the World Box at-025 body and start
on your figure. At which time we will talk about price and completion dates.
 
Looks amazing, bro. I'm still all in for the full figure and extra head.

I'll take both heads unpainted, please, as I'm going to mod one of them and get them painted at the same time so they match.

Thanks for including us in this grail!
 
(The post before this) Here's the final repaint with eye's looking up a little up to get that signature stare when you tilt the head down, he's still staring at you

Castings will be half off you use MM for the paint app.
This way we get a good painter as much work as possible.

Castings normally $50 and MM paint app is $100 = $150

But if you have MM do the paint app I will sell the casting for $25
So it will be total $125 for painted head.

Also How many people in the U.S. and how many people in a different country?

Please let me know who does and does not want the MM paint app.
If we get enough, maybe I can convince him to do a group discount.


Thanks
Ike
 
Last edited:
I’m US based.

I’d like my two headsculpts unpainted please.

MM is great, though (They painted about half of my customs) If you’re not doing your own custom work I highly recommend Ike-Con’s offer!
 
Back
Top