OPEN: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - Guide on P12
- Thread starter Fan
- Start date
Help Support Custom One-Sixth Figures Forum:
dsokyra
Super Freak
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.7)
I would like 1 set please...can you add me as well?
I would like 1 set please...can you add me as well?
- Joined
- May 12, 2012
- Messages
- 2,914
- Reaction score
- 708
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.7)
Have you on the list and will pm you the details in a minute. :hi5:
Sorry to say that run 1 & 2 lists are full atm and I first of all want to handle the two runs before I go over to the next.
But I'll pm you once I'll do so or if somebody jumps of the lists. :hi5:
Have you on the list and will pm you the details in a minute. :hi5:
Sorry to say that run 1 & 2 lists are full atm and I first of all want to handle the two runs before I go over to the next.
But I'll pm you once I'll do so or if somebody jumps of the lists. :hi5:
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.7)
Today must be my lucky day. I'll send in the payment as soon as I have your payment info via PM.
Cheers,
Today must be my lucky day. I'll send in the payment as soon as I have your payment info via PM.
Cheers,
dsokyra
Super Freak
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.7)
:gah: luckyyyy...seriously though...jealous over here. Good for you man! :hi5:
:gah: luckyyyy...seriously though...jealous over here. Good for you man! :hi5:
- Joined
- May 12, 2012
- Messages
- 2,914
- Reaction score
- 708
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.7)
No worries, I'll do my best to get as many rims in nice matt black as there are fellow boardies who don't like too see the alloys anymore, too. :1-1:
Just waiting for the cutting company to finally call.
ray: :impatient:
Thanks! Payment received, list updated. :hi5:
No worries, I'll do my best to get as many rims in nice matt black as there are fellow boardies who don't like too see the alloys anymore, too. :1-1:
Just waiting for the cutting company to finally call.
ray: :impatient:Thanks! Payment received, list updated. :hi5:
Last edited:
M
Mean Joe
Guest
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.8)
Payments sent for the black rims and tumbler blueprint....thanks!!
Payments sent for the black rims and tumbler blueprint....thanks!!
- Joined
- May 12, 2012
- Messages
- 2,914
- Reaction score
- 708
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.8)
Thank you, too!
Payment received and list updated.
Thank you, too!
Payment received and list updated.
- Joined
- May 12, 2012
- Messages
- 2,914
- Reaction score
- 708
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.8)
Want to give you a fast update:
That cutting company is good imo but therefore quite busy, I call them almost every day do get a concrete day :impatient:
even though it probably bugs them already, I don't care as I want to make you guys happy,
for the company the money they get must be enough to be happy. :lol
Today I will finally get the first pairs which I'll use to check the fitting again
and then I can give them green light to cut a lot more. :yess:
Want to give you a fast update:
That cutting company is good imo but therefore quite busy, I call them almost every day do get a concrete day :impatient:
even though it probably bugs them already, I don't care as I want to make you guys happy,
for the company the money they get must be enough to be happy. :lol
Today I will finally get the first pairs which I'll use to check the fitting again
and then I can give them green light to cut a lot more. :yess:
Last edited:
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.8)
Thanks for the update.
Thanks for the update.
- Joined
- May 12, 2012
- Messages
- 2,914
- Reaction score
- 708
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - small delay (p.8)
You're welcome! Just know how hard waiting can be. :hi5:
But the waiting is over now! :yess:
Finally got the machine cut protos as announced and I was so curious to come home today to see how they turned out:
(The small additional square cutting is only for me to mark the protos.)
I'm reliefed I can say that I'm very happy with the result so that I could order the first complete run immediately.
For all on the first run list this means I'll ship all paid at least by the end of the coming week.
All pairs of the second run list will be shipped about one week later.
I'll also make a small video on how to attach the decals in the imo easiest way.
Once again I thank you all for your patience and I'm glad I can finally make you guys happy with the black rims! :hi5:
You're welcome! Just know how hard waiting can be. :hi5:
But the waiting is over now! :yess:
Finally got the machine cut protos as announced and I was so curious to come home today to see how they turned out:
(The small additional square cutting is only for me to mark the protos.)
I'm reliefed I can say that I'm very happy with the result so that I could order the first complete run immediately.
For all on the first run list this means I'll ship all paid at least by the end of the coming week.
All pairs of the second run list will be shipped about one week later.
I'll also make a small video on how to attach the decals in the imo easiest way.
Once again I thank you all for your patience and I'm glad I can finally make you guys happy with the black rims! :hi5:
Last edited:
dsokyra
Super Freak
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - Update on page 10
Im hoping for a third run... :monkey2
Im hoping for a third run... :monkey2
- Joined
- May 12, 2012
- Messages
- 2,914
- Reaction score
- 708
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - Update on page 10
No worries, there will be a third run once I've handled run 1 and 2! :1-1:
No worries, there will be a third run once I've handled run 1 and 2! :1-1:
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - Shipping soon - Page 10
Thanks for the update, Pirate!
Looks great... new black material looks even better than the original.
Definitely a darker black. Great work!:clap
Appreciate your effort on all these projects. :hi5:
Thanks for the update, Pirate!
Looks great... new black material looks even better than the original.
Definitely a darker black. Great work!:clap
Appreciate your effort on all these projects. :hi5:
M
Mean Joe
Guest
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - Shipping soon - Page 10
Can't wait! Thanks for the update Pirate!!!
Can't wait! Thanks for the update Pirate!!!
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - Shipping soon - Page 10
I am wondering do tumbler owners elevate there tumbler when displaying. Put some cd cases underneath or something I do.
the covers look really good Pirate. I was worried to paint because of brush strokes,
I am wondering do tumbler owners elevate there tumbler when displaying. Put some cd cases underneath or something I do.
the covers look really good Pirate. I was worried to paint because of brush strokes,
- Joined
- May 12, 2012
- Messages
- 2,914
- Reaction score
- 708
Re: Custom 1/6 'Black Rims With Ease' suitable for Tumblers - Shipping soon - Page 10
You're welcome! Yes, that's right, have also compared both materials side by side and the final is definitelly the better choice, so the waiting was reasonable. :hi5:
Thanks buddy, really looking forward to shipping! :yess:
I just still have the foam and foil under the wheels to protect the Tumbler as I have to move it several times, before I finished my diorama display.
Brush strokes is one of the possible faults I feared, too and even though I wouldn't ever wanna sell the Tumbler again,
I think it's good one could remove the decals to have the Tumbler stock again, just in case.
You're welcome! Yes, that's right, have also compared both materials side by side and the final is definitelly the better choice, so the waiting was reasonable. :hi5:
Thanks buddy, really looking forward to shipping! :yess:
I just still have the foam and foil under the wheels to protect the Tumbler as I have to move it several times, before I finished my diorama display.
Brush strokes is one of the possible faults I feared, too and even though I wouldn't ever wanna sell the Tumbler again,
I think it's good one could remove the decals to have the Tumbler stock again, just in case.
Similar threads
