Terminator: TSCC - Cameron Reg/BD Sculpts [sdabbs] (CLOSED), Clothes (DEPOSIT DUE)

[Jameson Rook]

WHOAAAAAAA RYAN!!! Super Amazing!!!!! I love the battle damage version of yours..!!!! THIS IS BEYOND WORDS! Now this is a she-TERMINATOR!!!



THIS IS THE BEST YET THE TERMINATOR BY SEAN DEBBS!!!! THE BD version, ICONIC!

Thank you! Indeed the best Terminator since the MMS136/DX13!

wow! fantastic work Ryan!! I need to be a little more brave and damage my outfit a bit more

I can do a detailed guide if you want, or as mentioned, I might take in anybody who wants weathering done if I have the time.

what body did you end up using Ryan? Its a really good fit

It's the Phicen S02A, same as the one for regular Cameron. Expensive, but I like the consistency and how it fits.

 

[GeneralZodLives]

Got my clothing today! :rock Just waiting on the heads and I can finally get them put together.

 

[rjszar]

Did anybody receive their jacket with the zipper extending way down past the bottom? I assume I can trim this since it looks like it's sewn off on both sides to prevent the pull from falling off. How do you get the jacket on then? Do you have to pull it over like a shirt? A little help please before I go messing with things.

Also the pants looked like one leg was longer than the other straight out of the package. I tried pulling on it, but it didn't even out. I put it on the body and I guess it looks okay.

 

[Jameson Rook]

Got my clothing today! :rock Just waiting on the heads and I can finally get them put together.

Nice! Let's see that headless figure! :clap

On a side note, if anybody wants to put wigs on the head, please hire a professional! I have a gash on my palm now. :lol

 

[Jameson Rook]

Did anybody receive their jacket with the zipper extending way down past the bottom? I assume I can trim this since it looks like it's sewn off on both sides to prevent the pull from falling off. How do you get the jacket on then? Do you have to pull it over like a shirt? A little help please before I go messing with things.

Also the pants looked like one leg was longer than the other straight out of the package. I tried pulling on it, but it didn't even out. I put it on the body and I guess it looks okay.

That's odd. Maybe you should PM hnlee about it?

As for the pants, it doesn't really matter since there should be high flat boots covering them.

 

[GeneralZodLives]

I'll have to check mine tomorrow but I think my jacket had the long zipper too. It was so crazy today that I didn't have a chance to take it all out of the package then I ended up leaving them at work.

 

[rjszar]

The pants aren't an issue. Looking through the pictures, clearly Ryan, you have a different setup with a stop at the bottom. The pictures from Sean and the ones hnlee posted of the finished outfit show the zipper extending down, though not so far. I can trim it, but how do you get the jacket on?

 

[Jameson Rook]

The pants aren't an issue. Looking through the pictures, clearly Ryan, you have a different setup with a stop at the bottom. The pictures from Sean and the ones hnlee posted of the finished outfit show the zipper extending down, though not so far. I can trim it, but how do you get the jacket on?

I just unzipped it and you're right, you're missing the stop. You should PM hnlee regardless for advice.

Also, what body do you plan to use? I'm using the S02A but it's quite a tight fit so it needs the water treatment. I imagine a regular slim body wouldn't have this issue though.

 

[rjszar]

I just unzipped it and you're right, you're missing the stop. You should PM hnlee regardless for advice.

Also, what body do you plan to use? I'm using the S02A but it's quite a tight fit so it needs the water treatment. I imagine a regular slim body wouldn't have this issue though.

Using the same body.

 

[hnlee]

Did anybody receive their jacket with the zipper extending way down past the bottom? I assume I can trim this since it looks like it's sewn off on both sides to prevent the pull from falling off. How do you get the jacket on then? Do you have to pull it over like a shirt? A little help please before I go messing with things.

Also the pants looked like one leg was longer than the other straight out of the package. I tried pulling on it, but it didn't even out. I put it on the body and I guess it looks okay.

View attachment 274874
View attachment 274875

Hi! Some we put on purpose so you can unzip a bit down to the jacket for easier fitting from the bottom. I understand that Pichen Rubber body is kinda hard to adjust on suit cos kinda sticky (recommended: boss body hottoys but we understand some of you want bigger busts).
After you done that, just cut or trim the extender with a scissor. It is an easy cut/trim. Find sharp scissor guys .

NOTE: DONT UNZIP ALL THE WAY DOWN OR YOU WILL NOT BE ABLE TO ZIP IT BACK. Thank is the purpose for having longer zipper. After you finish with all, try not to take off the clothes cos it is better you leave it like that: SEALED
You can unzip but be careful : AGAIN, REPEAT: NOT TO UNZIP ALL THE WAY DOWN after you cut the extended zipper.

As for the pants, it is not longer on the other side, we sew it at the bottom, so you can adjust it by pulling or flip it from inside like our 1:1 pants. Maybe it is not properly flipped when we shipped them. Try it

 

[Jameson Rook]

Using the same body.

Okay, be careful when putting it on as it's a tight fit, but on the plus size, it looks REALLY good on that body.

 

[Jameson Rook]

Hi! Some we put on purpose so you can unzip a bit down to the jacket for easier fitting from the bottom. I understand that Pichen Rubber body is kinda hard to adjust on suit cos kinda sticky (recommended: boss body hottoys but we understand some of you want bigger busts).
After you done that, just cut the extender with a scissor. It is an easy cut. Find sharp scissor guys .

NOTE: DONT UNZIP ALL THE WAY DOWN OR YOU WILL NOT BE ABLE TO ZIP IT BACK. Thank is the purpose for having longer zipper. After you finish with all, try not to take off the clothes cos it is better you leave it like that: SEALED
You can unzip but be careful : AGAIN, REPEAT: NOT TO UNZIP ALL THE WAY DOWN after you cut the extended zipper.

Thank you for explaining!

You know what that means rjszar? It means you'll have a MUCH easier time putting on the jacket due to the extra long zippers! I was struggling with the short zip since the body is bigger than The Boss body.

 

[rjszar]

Just pm'd hnlee. Since Sean's picture doesn't show a stop at the bottom of his zipper, this must be manageable. Just never came across this situation before. Guess once you take the time to get it on, it stays on.

Edit: Just saw post from hnlee. All is good then.

 

[hnlee]

Thanks Ryan oh by the way guys. Here is a hint for easier adjusting your pichen body into tight or spandex suit: WRAP YOUR PICHEN RUBBERY BODY INSIDE A WRAPPER. Yupe.....not like you wrap your hot dogs or burritos, okay? But do it following the body shape. By that way, you will be easier to put on or take off your any clothes. After you put the clothes on, then unwrap it by pulling it from the arms.....not all can be pulled tough. Just leave it inside the clothes no harm for your figure. They will be warmer in plastic....

 

[Jameson Rook]

Thanks Ryan oh by the way guys. Here is a hint for easier adjusting your pichen body into tight or spandex suit: WRAP YOUR PICHEN RUBBERY BODY INSIDE A WRAPPER. Yupe.....not like you wrap your hot dogs or burritos, okay? But do it following the body shape. By that way, you will be easier to put on or take off your any clothes. After you put the clothes on, then unwrap it by pulling it from the arms.....not all can be pulled tough. Just leave it inside the clothes no harm for your figure. They will be warmer in plastic....

Kinky!

 

[rjszar]

Thanks Ryan oh by the way guys. Here is a hint for easier adjusting your pichen body into tight or spandex suit: WRAP YOUR PICHEN RUBBERY BODY INSIDE A WRAPPER. Yupe.....not like you wrap your hot dogs or burritos, okay? But do it following the body shape. By that way, you will be easier to put on or take off your any clothes. After you put the clothes on, then unwrap it by pulling it from the arms.....not all can be pulled tough. Just leave it inside the clothes no harm for your figure. They will be warmer in plastic....

I heard someone mention that trick before. Good one to remember. Wasn't too hard to get the pants on, but that might have helped.

 

[theuzi9mm]

i received my clothing set yesterday, good info about the zipper (I had no time to check it really). I plan on using a phicen body as well but right now this is the only free body I have-

Skin tone will match my heads better I think (i got some kumik ones as I was too late joining here to get in on the head sculpt here) but this phicen's bust size will be probably too big! Here's my heads-

Still trying to locate suitable boots, where did some of you guys get your boots for your cameron?

 

[rjszar]

I think if you just search 1/6 female boots in Toys and Hobbies on ebay, that would be your best bet. She did wear a number of styles. Just pick what you like. Don't know what kind of look you are going for. The boots she wore with the black pants and tank top were pretty elaborate. I'm going to attempt to try to customize a pair I bought to get them close.

On another note. Is it possible to move the part in the hair on the sculpts you purchased or is the styling pretty much a done deal? Cameron/Summer parted her hair on the side, not in the center. I found a suitable Barbie doll a few years back that I was going to scalp for a custom I had then. The color on those Kumiks is a nice match so if the part could be moved, might try them.

 

[dxdave]

Hey there.....trying to get a message to GDB (Brent) about painted head....payment sent. Mailbox is full.

 

[gdb]

Hey there.....trying to get a message to GDB (Brent) about painted head....payment sent. Mailbox is full.

Just made some space for you. Sorry about that.