FRIDAY THE 13TH - Jason Pt. 3 (Ver 1) by Beto Matali

[TheFiend]

Yeah, I used one those Ace bodies for my parts 3.

Sent from my LG-E739 using Tapatalk 2

 

[Something Sexy]

Is there any difference in bodies between DAM figures? I am not too familiar with DAM or Ace stuff.

 

[galactiboy]

I think some of them are a bit taller than others. I did notice the two I bought were identical to the Ace body I had, but a bit shorter and the rear was smaller. On the plus side most pant will fit them unlike the original Ace bodies.

 

[turbo.VS.ozone]

Anyone who has not sent payment yet, please do so. The faster payments are sent in, the sooner Beto can start the casting process. Thanks.

 

[agonistes86]

I will send my payment in tonight.

 

[Something Sexy]

Something like this?

https://www.ebay.com/itm/XE21-15-1-...d=100033&prg=1011&rk=4&rkt=4&sd=271143945300&

 

[annihilate22]

Is it possible to have the head pre-drilled by beto ? I'm not sure if my painter could do this and I don't wanna mess this up.

 

[galactiboy]

Something like this?

https://www.ebay.com/itm/XE21-15-1-...d=100033&prg=1011&rk=4&rkt=4&sd=271143945300&

Yep that's the one, but $42 seems a bit high.

 

[galactiboy]

Here's a comparison of the Ace body and the new DAM ones. Ace is on the left and DAM is on the right.

Essentially the torsos are the same, but when you get to the legs the design changes quite a bit. However, height is about the same so no real difference, just a different leg design and the DAM has a rubber butt so more pants can fit him. Notice on the Ace I dremmeled it down a bit as literally no pants would fit it :lol Also, so far the DAM seems to have tighter joints... I love the look of the Ace body, but each one I've had when loose pretty quickly.

 

[Something Sexy]

Here's a comparison of the Ace body and the new DAM ones. Ace is on the left and DAM is on the right.

Essentially the torsos are the same, but when you get to the legs the design changes quite a bit. However, height is about the same so no real difference, just a different leg design and the DAM has a rubber butt so more pants can fit him. Notice on the Ace I dremmeled it down a bit as literally no pants would fit it :lol Also, so far the DAM seems to have tighter joints... I love the look of the Ace body, but each one I've had when loose pretty quickly.

Thanks for that! I will see if I can score a DAM body then.

 

[betomatali]

ALL my headsculpts come predrilled, preassure casting and colored resins, the real plus of ACE body is you can extend the legs 1/4 inch using a screwdriver only

 

[skooternb]

ALL my headsculpts come predrilled, preassure casting and colored resins, the real plus of ACE body is you can extend the legs 1/4 inch using a screwdriver only

That is awesome! I never knew!

 

[hotslayer73]

Something like this?

https://www.ebay.com/itm/XE21-15-1-...d=100033&prg=1011&rk=4&rkt=4&sd=271143945300&

You dont need one with the head , that will just boost the price up - heres one for $23.00 free shipping :wink1:


https://www.ebay.com/itm/1-6-scale-...0575?pt=US_Action_Figures&hash=item2c6b7af25f

 

[hotslayer73]

That is awesome! I never knew!

yeah betos heads are ready to pop on to a body without any glueing etc

 

[galactiboy]

ALL my headsculpts come predrilled, preassure casting and colored resins, the real plus of ACE body is you can extend the legs 1/4 inch using a screwdriver only

That is awesome... I never knew that either :lol

The DAM just uses a HT compatible ball socket joint... so you could extend the height by using some of the long leg pegs. In the end the cost would probably balance out just depends on what works for you.

 

[elvis1976]

Payment has been sent for the clear resin mask option.

 

[betomatali]

you no nedd neck adapter, you can glue the head directly over the ace body (or similar) also this headsculpt can be adapted for the sideshow Jason part 3 I remember some who do this and the result was very good sadly i dont have images

 

[Invictus Sol]

Payment has been sent for the clear resin mask option.

Looking forward to your Jason Pt. III, Elvis.

 

[betomatali]

I f some one is interesed in the mommy head just let me know best regards
https://sideshowcollectors.com/forums/showthread.php?t=132383

Depending of the response of this old Jason 3 headsculpt maybe I can offer Manhattan Jason and Remake Jason in the near future

best regards

 

[elvis1976]

Definitely interested in Manhattan Jason and Remake one