-INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Thompson Payment Instructions first page

[mao86]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Very promising start Mudblood!!! I'm sure it'll look great when completed.

 

[Rahmier84]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Alright, here's one crate made from some scrap wood I had laying around. From some of the reference pictures I saw, not all the boards were the same size and left spaces, so that's what I did. If everyone wants them to look perfect with no spaces, that's what I'll do. From looking at my own work, I now know that I need to make them a bit more rectangular and maybe a tad shorter. I kind of modeled the crate after those "meth tubs" from Office Depot. Comments and criticism are welcome. The lid is kind of just a placeholder until I fine tune the details with a few more practice runs.

Again, this is not the final piece, this is kind of just a trial run to work out the details.

The base will have to wait until tonight or tomorrow. :lol Arkansas has a heat index of 108°F today and my shop has no air conditioning.

EDIT: I now see that the sides don't alternate in a step pattern. That'll be fixed in the final product.

Looks great man thanks for doing these!

 

[D-9-]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Interested in - unpainted Nucky sculpt without hat

 

[Mudblood]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Here's another crate with better dimensions. It's about 3x2x1.75", made from rough cut aged cedar. Nothing is glued in these pictures so, the fit will be tighter. If you guys like what you see, I can create an interest list for you guys. Keep in mind these are all on unfinished wood, so the final product will look miles better. Crates will come with logos done by Hunter. I can use a different wood if you guys don't like the red of cedar. I can try oak.
I wasn't sure what look of the boardwalk was wanted (I haven't even seen the show yet :lol) so here are 2 examples. The boards are pine, not squared off for tight fit. Final products will fit damn near perfectly. If there's enough interest, I can offer probably up to 2-3 styles of boardwalk base.

Comments and criticism welcome, as always.

 

[schea25]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Watch the show mudblood!!!!

But those look great to me...I'd definitely be in for some crates with the logos!

 

[Godfather1408]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Few 1:6 bottles cut up some straw pop it in the create and bam! You have yourself one sweet looking piece
Hyped for this although I commissioned Sean dabbs to do Harrow I wouldn't mind seeing him done as I'd love to display 2.

 

[schea25]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

One way or another Harrow does have to get done. He would make an unbelievable figure (with removable mask).

 

[Edub]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

The crate looks amazing. I would be very interested in one when the time comes as well. Would be a great piece to display with nuckey and harrow

 

[Mudblood]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Watch the show mudblood!!!!
But those look great to me...I'd definitely be in for some crates with the logos!

I'm actually about to borrow it from a friend or find it online. Thanks! I'll talk to Hunter a bit more and I'll start up a thread for you guys.

Few 1:6 bottles cut up some straw pop it in the create and bam! You have yourself one sweet looking piece

I'm working on making little sections to go inside of them for about 6 bottles. I'll stuff hay in there when I get them ready to ship.

The crate looks amazing. I would be very interested in one when the time comes as well. Would be a great piece to display with nuckey and harrow

Thanks! I'm still getting a feel for making them look good and accurate, so the final product should look much better. Does anyone care what wood they're made from or is that just me over thinking it?

 

[Rdeezy]

I think this color wood with a bit of weathering/aging would look great

 

[Hunterdnrc]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Remember folks, I'm workin' on getting bottles going too!

 

[Mudblood]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

I think this color wood with a bit of weathering/aging would look great

Gotcha! I'll go back to pine or I might try oak, since that's what the whiskey barrels would be made of. But yeah, I can beat it up a little and add some light staining.

 

[A Jedi Warrior]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

any updates on headsculpt?

 

[scottyb]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

any updates on headsculpt?

Inigou gone away for 10 days said he did have some time to work while away itll be finished in the next 2 weeks and sent to print.

 

[A Jedi Warrior]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

thanks for the update

 

[Mudblood]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Hunter and I's crate/base thread is here for those interested.

https://www.sideshowcollectors.com/...iskey-Crate-and-Bottles-(Hunterdnrc-Mudblood)

 

[Rdeezy]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

Stnmikita payment received for Nucky suit

 

[A Jedi Warrior]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

i thought the suits were limited to 30 why did he send payment if he is not on the list for either headsculpt or suit, shouldn't he go on the waitlist and the people that are on the list get taken care of first? i dont really care as long as i get mine just a honest question though thanks

 

[Rdeezy]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

The most fair way to do it is first 30 paid are in...interest in something means nothing as you know.

 

[A Jedi Warrior]

Re: -INIGOU- YUNSIL-YOURMASTERDESIGNS- Nukey Tompson (Suit & Sculpt)

thats what i figured thanks