[Scaletta] 1:6 T-3 Terminatrix (gauging interest)

[nexus]

Hopefully there are lots of Terminator fans out there.
I've been PMing with the folks at Scaletta Studio about producing a custom 1:6 Terminatrix since I don't think we'll ever see one from Hot Toys. It's a complex piece, but these guys have the talent to pull it off. Just check out some of their other projects like Edge of Tomorrow, MOS Faora, and Judge Dredd.

I've been given the green light to start an interest thread for the T-X. Whether you liked T3 or not, the T-X was a fantastic design and this would be an excellent addition to the Terminator line. The ultimate package for me would be to have the endo as well as the Kristanna Loken disguise version, but that will depend on interest. So the plan would be to start with the Endo, and then if there is enough interest the T-X disguise project would open.

Here's the breakdown.

Project #1 Terminator TX (Terminatrix) Endoskeleton -- Detailed articulated endoskeleton with blue light-up.

Project #2 TX in Disguise as portrayed by Kristanna Loken
2. Female figure with Loken head sculpt, leather-like burgundy suit, black boots with spike heels. (note Kristanna is 5'11" so would likely need ankle extenders)

Project #3 Extras -- separate arm weapon, police issue sidearm, bullet damaged or 1/2 endo reveal head sculpt

Interest List

T-X Terminatrix Endoskeleton
1. nexus
2. GeneralZodLives
3. ifrack
4. Triton
5. TheWhatWhatNow
6. **16K** (depending on price)
7. Garshia
8. dj.Cbear (depending on price)
9. Proteus 360 (depending on price)
10. rjszar
11. center68
12. OzDean
13. Ronvdc
14. wwe_michael56 (depending on price)
15.
16.
17.
18.
19.
20.

Terminatrix in Disguise Kristanna Loken (note: will be produced if and after T-X Endoskeleton)
1. nexus
2. GeneralZodLives
3. ifrack
4. Triton
5. TheWhatWhatNow
6. davejames
7. Levit05
8. Texlander
9. Garshia
10. **16K** (depending on price)
11. dj.Cbear (depending on price)
12. Proteus 360 (depending on price)
13. rjszar
14. center68
15. Leon 911
16. johnautobot (unpainted headsculpt and outfit)
17. OzDean
18. Ronvdc
19. wwe_michael56 (depending on price)
20.


Terminatrix Disguise Add-On Accessories
1. nexus
2. GeneralZodLives
3. ifrack
4. Triton
5. TheWhatWhatNow
6. davejames
7. Levit05
8. **16K** (price?)
9. Garshia
10. dj.Cbear (depending on price)
11. Proteus 360 (depending on price)
12. rjszar
13. center68
14. OzDean
15. Ronvdc
16. wwe_michael56 (depending on price)

WIP and Reference for Inspiration

 

[GeneralZodLives]

Interested

 

[ifrack]

Definitely interested

 

[Triton]

Nice project! Not sure if I can afford it but would like to see how it would turn out.

 

[TheWhatWhatNow]

I would be interested in Project 1 & 2.
Project Number 2 looks like it should be a pretty straight up Custom but Project Number 1, Yikes!!!
Every single piece of her would have to be sculpted!
Having a hard time picturing how that could be accomplished and what the cost would be??

 

[nexus]

I would be interested in Project 1 & 2.
Project Number 2 looks like it should be a pretty straight up Custom but Project Number 1, Yikes!!!
Every single piece of her would have to be sculpted!
Having a hard time picturing how that could be accomplished and what the cost would be??

We've discussed the complexity, but it can be done. Check out the Edge of Tomorrow project (https://www.sideshowcollectors.com/...inals-emily-2nd-stage.html?highlight=scaletta) or Faora (https://www.sideshowcollectors.com/...caletta-steel-faora-4.html?highlight=scaletta). We'd be gathering a lot of reference to make this one happen. Not sure on cost, but the goal is to produce a piece that can stand side by side with a HT Endo. I have the 1:3 scale Cinemaquette T-X and T-850 endos, and those are two of the coolest pieces in the collection.

 

[TheWhatWhatNow]

I am already on the list for Both Emily and Faora.
It's actually Great that you have the Cinemaquette, so much reference is in that piece alone.
I am in for All Three Projects!
Thanks!

 

[davejames]

Regardless of what you think of the movie, there's no denying she had a very cool and memorable look, and I would love to have a 1/6 figure of her standing next to my Arnold Terminator someday.

Although I think the most I would ever want is just a Loken in the red outfit with the metal arm, since that's always what I remember most. The endoskeleton doesn't really interest me that much, as nice a design as it is.

 

[**16k**]

I'm interested, by both projects, but probably won't be able to afford them, so count me as a maybe!

 

[dj.Cbear]

Interest in #2 or #3

 

[Levit05]

I would be down for either 2 or 3...or both at the same time!!!!

 

[Texlander]

Depending on price and final look, I'd be interested in #2.

 

[woodrob]

Let`s make it clear, gang - options 2 or 3 will be considered only after and if the 1 set will be successfull nexus - i think we need a list on the first page for easiest monitoring

 

[GARSHIA]

I'm very interested in all projects

 

[nexus]

Updated thread with interest list. Keep in mind how cool this will look with a Terminator collection. Hopefully HT will announce a new 1:6 T-800 Endo soon.

 

[dj.Cbear]

Updated thread with interest list. Keep in mind how cool this will look with a Terminator collection. Hopefully HT will announce a new 1:6 T-800 Endo soon.

Don't see my name on the list. Please update. If endoskeleton is the first project then please add me. Depending on price.

 

[PROTEUS360]

Interested depending price

 

[rjszar]

I would be interested in all 3 projects although I do have a nice Loken custom already. I hope at least project 1 can be done and be done well.

Please add me to the lists.

 

[nexus]

I would be interested in all 3 projects although I do have a nice Loken custom already. I hope at least project 1 can be done and be done well.

Do you have pics of the Loken custom? Would be great to see.

 

[woodrob]

Hey y`all, for now we are makin some wips of endo, need to figure out how to make it possible hope there would be enough interest to start this project for real