Full figure [CLOSED] TORIBOX Joker 89 Full Outfit + Don Fung "ThreeStep Studio" SCULPT

Custom One-Sixth Figures Forum

Help Support Custom One-Sixth Figures Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Which option should we go for Balloonman sculpt?

  • A. Laughing Sculpt + Sculpted Hat

    Votes: 4 25.0%
  • B. Laughing Sculpt w/ Hair

    Votes: 8 50.0%
  • C. Cynical Sculpt + Sculpted Hat

    Votes: 6 37.5%
  • D. Laughing Sculpt w/ Bald Head and Hair on the side (no extra fees for hat)

    Votes: 2 12.5%

  • Total voters
    16
  • Poll closed .
Just curious, your pics is this same prototype correct? The shoulders in this feel much better than the newer pics. If it's the same, then I have no complaints.
Yes, will send all the buttons to Toribox, and they will send back the prototype to me.
After taking final photo, we will start collecting the full payment, and start the production.

View attachment 460756
 
Just curious, your pics is this same prototype correct? The shoulders in this feel much better than the newer pics. If it's the same, then I have no complaints.
It’s the same, just need to futz it more.. will take more pictures within this week.
 
Looking really good Jagzz, great to see the figure coming together now, would also like to see more photos, on a more neutral background like others have said, but also a shot from the back if possible.

I think the current problem with the head could be due to how puffed out the collar is, the whole collar is now sitting above the cut of the jacket which it shouldn't do, hopefully you can fix this with futzing and like you said would enable the head to then sit a little lower.

Other bits I picked up on is the tie, I know you mentioned you are talking to yunsil around the metallic dots but I noticed the whole cravat is actually a metallic material, I think getting this right will make a dig difference, currently it is too thick in width before each ironed bend but hopefully with the right material it can drape more naturally like photos below


1692605916073.png
1692605937860.png


1692606622905.png
1692606136184.png
 
Another thing to mention that i've just picked up on is around buttons, I believe jack has white buttons on his orange shirt, not sure if we change from orange to white?

More importantly though I know yunsil normally uses the stick on adhesive buttons, but as you can see with the photos below jacks tailcoat has 'Shank buttons; covered in the same fabric used for the coat. Two on each side at the front, two on the rear, and four for each cuff.

Not sure if this is something we can do? but I feel just like the cufflinks it's needed to make this figure as screen accurate as possible and to lift it to that next level.

1692607584409.png
1692607622915.png

1692608178643.png
 
I don’t want to speak for those that are on this run, as I am not, but the suit would be more accurate if the tones were less of a dark violet, and more vibrant like @partyman posted above as well as this photo below,

4263A7AF-C949-4DFF-917C-D46EF5E9762E.jpeg


I know some people prefer how it looks on screen than in real life so I don’t want to encourage changes the paying customers aren’t fond of. Just my 2 cents.
 
I agree with all of Partyman's points. Thinner/flatter collar and white buttons DEFINITELY, as you can see below. In your proto images, it looks like the inside flap of the vest (where the buttons are) protrudes the top too much. The interior flap doesn't ride that high. Also, it looks like the vest closes further across the stomach and the buttons are spaced a little more. Otherwise, it looks good.
GRP6GSUSEFTQ46WOPQ83.jpg

Vest flap:
310709-IMG-8502.jpeg
 
Last edited:
I hope the color of the buttons on the shirt can be corrected, because he is very conspicuous.
 
Looking really good Jagzz, great to see the figure coming together now, would also like to see more photos, on a more neutral background like others have said, but also a shot from the back if possible.

I think the current problem with the head could be due to how puffed out the collar is, the whole collar is now sitting above the cut of the jacket which it shouldn't do, hopefully you can fix this with futzing and like you said would enable the head to then sit a little lower.

Other bits I picked up on is the tie, I know you mentioned you are talking to yunsil around the metallic dots but I noticed the whole cravat is actually a metallic material, I think getting this right will make a dig difference, currently it is too thick in width before each ironed bend but hopefully with the right material it can drape more naturally like photos below


View attachment 463530 View attachment 463531

View attachment 463533 View attachment 463532
Yes the tie will be the first thing we improve in the production stage!, definitely.
 
Another thing to mention that i've just picked up on is around buttons, I believe jack has white buttons on his orange shirt, not sure if we change from orange to white?

More importantly though I know yunsil normally uses the stick on adhesive buttons, but as you can see with the photos below jacks tailcoat has 'Shank buttons; covered in the same fabric used for the coat. Two on each side at the front, two on the rear, and four for each cuff.

Not sure if this is something we can do? but I feel just like the cufflinks it's needed to make this figure as screen accurate as possible and to lift it to that next level.

View attachment 463534View attachment 463535
View attachment 463536
Definitely doable, and yes I will request white color buttons for the shirt.
 
I think depends on the lighting, we already pretty much got the color correct.
In a daylight it have much more brighter color like that, but we're aiming for color in the movie and in the promo shot.
 
Jagzz Joker89 8.jpg


I will try to take a daylight shot, but it's not that easy hahaha.
Please if you can pay the balance, would be great if we can send all the payments latest next week.
I want to speed up the production time.
 
No worries Jagzz, if it’ll brighten up like that I’m sure everyone here will be happy.
 
Hey @jagzz, really appreciate you taking in all the points I raised above pal, reckon it's going to look real quality with all those updates (y)

would still love to get some daylight photos, seeing the video Nick posted above around the colour of the coat being specifically the colour of the LA Lakers, found it really interesting and to what we've seen so far I wonder if we are a little off. Have put the lightest proto shot we've had so far next to the colour below and I see Nicks point, the lakers purple is a little more light and vibrant.

As said would be good to see more images of your current proto but our we too late for yunsil to address this now?

Screenshot 2023-08-22 at 09.53.57.png
Screenshot 2023-08-22 at 09.35.40.png
Screenshot 2023-08-22 at 09.49.42.png
 

Attachments

  • 308339-WhatsApp-Image-2023-05-30-at-19.17.15.jpeg
    308339-WhatsApp-Image-2023-05-30-at-19.17.15.jpeg
    105.5 KB
  • 305138-3053A012-C334-486D-9513-1E19EB80A22F.jpeg
    305138-3053A012-C334-486D-9513-1E19EB80A22F.jpeg
    49.3 KB
  • Screenshot 2023-08-22 at 09.30.23.png
    Screenshot 2023-08-22 at 09.30.23.png
    301.6 KB
Back
Top