[CULT KING]- Career Crook & The Lieutenant - **PRE-OREDER OPEN**

Custom One-Sixth Figures Forum

Help Support Custom One-Sixth Figures Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Can't have Gido not getting his rest lol :)

My only complaint with Neil really is just the eyes. Having it in hand I think that's what throws the likeness off a bit. But not bad. And it also has the issue Pop was talking about with the eyes not being brown they are grey. It's hardly noticeable though. It's still a really great De Niro sculpt and with the glasses on it looks spot on to me. Here's a few iPhone pics I took. The suit and accessories are great I think. The glasses are really nice too. I'm tempted to buy this one from Denny lol but I spent way too much this month with Christmas coming haha

f5c23e70eb2c8b7b7b55aee86d1d1da9.jpg


999d5e04c93497e028423e6f7bac24d4.jpg



Sent from my iPhone using Tapatalk

Thanks for the pics! Those rotten USPS scoundrels evaded me today, but I'll go pick these guys up in the morning.

The suit jacket didn't shrink since the proto, did it? Is it still a little oversized like in CK's pics?
 
Last edited:
Thanks for the pics! Those rotten USPS scoundrels evaded me today, but I'll go pick these guys up in the morning.

The suit jacket didn't shrink since the proto, did it? Is it still a little oversized like in CK's pics?

Damn Mike I hate when that happens lol! Knowing it's so close yet you have to wait another day to get it:/ I'm kicking myself that I have to wait till next week to get Hanna lol

No it didn't shrink I don't think. It's a bit oversized but not bad. I actually like the fit of the suit. That was another thing I didn't like from Neil's proto was the suit. Loved Hannas suit. But in hand I think it's great. Could be a tad smaller but overall it's fine to me.


Sent from my iPhone using Tapatalk
 
I actually think it's a good thing to be oversized in this case :lol. They all wore their jackets a few size too big to fit all of their gear. I thought the jacket in the protos looked accurate, and of course would look a lot better with the ammo vest underneath
 
Looks like they didn't even try to repaint either of characters like they said they would...
 
I actually think it's a good thing to be oversized in this case :lol. They all wore their jackets a few size too big to fit all of their gear. I thought the jacket in the protos looked accurate, and of course would look a lot better with the ammo vest underneath

True! I'll be putting a Kevlar vest on my Vincent as well. Hope it fits ok lol. From the proto his suit looked tight fitting. I may have to do some modding to it.


Sent from my iPhone using Tapatalk
 
Alright, just got my pair (#2, no less) and busted them open. One of my all-time grail pairs. Very happy that Mr. X went through and did them!

Impressions:
-Hanna is an excellent figure. Head is great, even though it is a tad smaller than Neil's. Also, the glasses holes are a bit more visible than I'd like.
-I really like Hanna's jewelry.
-Only nit with Hanna is that the pocket on his left breast is a faux pocket - just a sewn on piece of fabric. This means that the badge cannot attach to it. Not sure how I am going to resolve that.
-Neil is a mixed bag. I love the head and think that it looks much better than the protos, especially with a strong light that creates contrast and shadows. Shirt collar and tie is very nice. Jacket looks good. Just those accessories...
-The secret item was Neil's duffle, which is great, but it also highlights how frustratingly incomplete the figure is. He has the money bag but no gloved hands, money to put in the bag, or assault vest. If you don't plan on finishing off your Neil with Craftone parts then the bag is kind of superfluous.
-Guns on both figures are a little rough. The butt-stock of Neil's M4 is very rough, as is the bottom of the pistols. Hanna's rifle barrel is not drilled, and this looks like it has a plug in it.

Overall, I am pleased, but I do kind of hate having to track down extra parts (vest w/magazines and hands for Neil, vest and pistol holster for Hanna) for an expensive custom figure set. Very happy to have these though, and they are far better base figures than any other Heat figures available (in my opinion, of course). Once I get them finished, I believe they will be one of my favorite sets of figures that I own.
 
Gang

Get " Vincent "

I think this one will be one of Mr X grails !

The suit, headsculpt is dead on . I add a vest and he
Look like he just came right out of the movie

A Quick pic with young Al

 
Can't have Gido not getting his rest lol :)

My only complaint with Neil really is just the eyes. Having it in hand I think that's what throws the likeness off a bit. But not bad. And it also has the issue Pop was talking about with the eyes not being brown they are grey. It's hardly noticeable though. It's still a really great De Niro sculpt and with the glasses on it looks spot on to me. Here's a few iPhone pics I took. The suit and accessories are great I think. The glasses are really nice too. I'm tempted to buy this one from Denny lol but I spent way too much this month with Christmas coming haha

f5c23e70eb2c8b7b7b55aee86d1d1da9.jpg


999d5e04c93497e028423e6f7bac24d4.jpg



Sent from my iPhone using Tapatalk

Whoa! Neil looks fantastic! I am really digging that :rock
 
Gang

Get " Vincent "

I think this one will be one of Mr X grails !

The suit, headsculpt is dead on . I add a vest and he
Look like he just came right out of the movie

A Quick pic with young Al

Here Hanna looks really spot-on.Congrats, Ymba!Which west you have used?

Sent from my D6603 using Tapatalk
 
Hi GIDo

I found this vest in my parts bin but it looks pretty screen accurate

You got to add the vest :)
 
love the set..found the perfect blue vest, got a vest for neal....gotta change the hands and magnatize the badge, thats it..
heatboth_zpsau1hks1d.jpg

heatpacino_zpsmgxbodbs.jpg

heatdeniro_zpswmdwsnmq.jpg
 
[CULT KING]- Career Crook & The Lieutenant - **PRE-OREDER OPEN**

Got my Vincent today. Loving this figure so much. It's one of the more lifelike pieces I own. I added the Kevlar vest will have to find a more accurate one soon. Also taped his colt inside the jacket to look as its holstered like in the film. I'm loving all the accessories all very screen accurate. My only gripe is Vincent colt was suppose to have white grips. And the whole gun came black. So I just repainted the grips myself. Easy fix. Not much bad to say. It's an incredible piece! Loving the pics you guys are posting! Here's a few of my setup

2be41c370a2ea694700f3e940b85e5cb.jpg


9f6c5d28ebd76071d9aa252ef6d35d78.jpg


02e892d54770ab75a6d60f9dabd17282.jpg



Sent from my iPhone using Tapatalk
 
What is the best way to get the badge to stay in the pocket since it is not deep enough to for the clip to go down? Also on the pistol handle, is it supposed to be white or a pearl?
 
Really nice!Congrats!

Sent from my D6603 using Tapatalk

Thanks Gido:)

What is the best way to get the badge to stay in the pocket since it is not deep enough to for the clip to go down? Also on the pistol handle, is it supposed to be white or a pearl?

I just have mine resting in the pocket. It's easy for it to fall out but if you pose him first then place it hanging from the pocket it stays. And the pistol grips are made of ivory in the film. So I went with an off white. Sucks to have to go back and paint it especially since in the proto it was shown the screen accurate way:/ but it's an easy fix


Sent from my iPhone using Tapatalk
 
Back
Top