[WIP Update] Custom 1/6 BrBa Don Hector 'Tio' Salamanca with 1/6 Wheelchair & Bell

Custom One-Sixth Figures Forum

Help Support Custom One-Sixth Figures Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Fan

1/6 addicted since 2012
Premium Member
Joined
May 12, 2012
Messages
2,914
Reaction score
708
Update

b142a298b50e09372557311e31e7344c.png


1ef6d0ecd3397c2a96f8f6c0b0956170.png


Are you interested in a very limited run of that ultra evil and iconic character?

6395cb24dc09c37c938ffc541d0290d4_400x400.jpeg


[video=youtube_share;pWso-qRaIlM]

I would scratch build the wheelchair with bell, and Hector's plastic tubes and oxygen bottle.

350


Already have an interested sculptor and asked Yunsil if she likes to do the tailoring.

Lmk if you would be in and I will tackle it. Ding! Ding!

Fan
Hosam-G
GeneralZodLives
kstarke-records
playlandtoys
NightT47
efeeke82
GARCO=N
Matheus_
kstarke-records
A. Crosby
gomyoil
GESUS
Ksharp_miller
shugeybear
Icedcoffee54
mu9887
sunnywong921
BennyG
Icedcoffee54
ms8794.jang

...

...
 
Last edited:
Re: Custom 1/6 BrBa Hector 'Tio' Salamanca with 1/6 Wheelchair & Bell

Interested in the figure only, not the wheelchair and bell. :)
 
Re: Custom 1/6 BrBa Hector 'Tio' Salamanca with 1/6 Wheelchair & Bell

Thanks fellas, list is up-to-date.
 
Re: Custom 1/6 BrBa Hector 'Tio' Salamanca with 1/6 Wheelchair & Bell

interested


Sent from my iPhone using Tapatalk
 
Thanks man! We need some more interest to make this happen but I'm sure over time it will see green light.
 
Thank you for the interest! I am also still very interested in oraganizing this and especially in building the 1/6 wheel chair.
It all depends on further interest. (y) If there is some more interest I will continue this project later this year with some first progress before that.

There was not a lot of interest back when I opened this thread so I hesitated,
though I already spent some time researching specs and details.
 
Last edited:
Thank you for the interest! I am also still interested in oraganizing this and building the 1/6 wheel chair, it all depends on further interest. (y)
If there is some more interest now I will continue this project.

There was not a lot of interest back when I opened this thread so I hesitated,
though I already spent some time researching specs and details.

I'd say avoid Toribox. Too long time to proceed and less people will join as she only take orders above 10. If this will have Yunsil on board, I will have to pass. It's so simple to ask any other tailor in my opinion as it's just a simple shirt and pants. Or just make it head sculpt/wheelchair run. :)
 
Back
Top