Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Sent from my SM-G925V using Tapatalk
[emoji106]
Sent from my SM-G925V using Tapatalk
Terminator 2 MM1 Grenade Launcher: LIST CLOSED, SHIPPED
- Thread starter DoggieDoc
- Start date
Help Support Custom One-Sixth Figures Forum:
rjszar
Super Freak
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Now that's commitment to accuracy.
Now that's commitment to accuracy.
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Sent from my SM-G925V using Tapatalk
I'm not sure how well it will show up but worst case scenario I just smooth it over before casting. I wanted to give it a shot though!
Sent from my SM-G925V using Tapatalk
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Interested in 1/4 and 1/6
Interested in 1/4 and 1/6
wwe_michael56
Super Freak
- Joined
- Nov 21, 2015
- Messages
- 1,411
- Reaction score
- 1
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Interested in 1/4 and 1/6
Interested in 1/4 and 1/6
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Thanks very much. The model is off to the printers. I went with the highest end printing process available to try and preserve all details. A little more expensive on my end but owell, it's worth it so far! Unfortunately it looks like it may be almost 2 weeks before I have something to show off. As soon as I have something in hand, though, you will all know it.
By the way, anyone who wants to can still jump on, there's no limit to the total at this time!/
Thanks very much. The model is off to the printers. I went with the highest end printing process available to try and preserve all details. A little more expensive on my end but owell, it's worth it so far! Unfortunately it looks like it may be almost 2 weeks before I have something to show off. As soon as I have something in hand, though, you will all know it.
By the way, anyone who wants to can still jump on, there's no limit to the total at this time!/
Sidious-66
Super Freak
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Interested in 1/6 please.
Interested in 1/6 please.
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
I've got you down, thanks!
On another note...I had a request from Olbertfrog about doing additional weapons in 1/4 scale for The Terminator. Examples are the AR-18, Colt Commando CAR-15, SPAS shotgun, etc. what do you all think?
Sent from my iPad using Tapatalk
I've got you down, thanks!
On another note...I had a request from Olbertfrog about doing additional weapons in 1/4 scale for The Terminator. Examples are the AR-18, Colt Commando CAR-15, SPAS shotgun, etc. what do you all think?
Sent from my iPad using Tapatalk
xenoviper
Super Freak
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Yes please!
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
I have no 1:4 scale requirements myself as I'm not doing any customs or kitbashes beyond what was officially made at that scale.
I could think of a few 1:6 and 1:10 items of the more obscure or 'everyday' variety that I'd like to have for Terminator figures that no company has made though - such as what I like to call the T-800's shopping trolley in T2 - the 2 wheeled cart he uses at Cyberdyne packed full of his weapons and explosives.
these explosive barrels:
or this thing:
Granted I expect there'd be very limited interest in these.
I have no 1:4 scale requirements myself as I'm not doing any customs or kitbashes beyond what was officially made at that scale.
I could think of a few 1:6 and 1:10 items of the more obscure or 'everyday' variety that I'd like to have for Terminator figures that no company has made though - such as what I like to call the T-800's shopping trolley in T2 - the 2 wheeled cart he uses at Cyberdyne packed full of his weapons and explosives.
these explosive barrels:
or this thing:
Granted I expect there'd be very limited interest in these.
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Limited interest, perhaps, but those look like they'd be so fun to model and make!
Sent from my iPad using Tapatalk
I have no 1:4 scale requirements myself as I'm not doing any customs or kitbashes beyond what was officially made at that scale.
I could think of a few 1:6 and 1:10 items of the more obscure or 'everyday' variety that I'd like to have for Terminator figures that no company has made though - such as what I like to call the T-800's shopping trolley in T2 - the 2 wheeled cart he uses at Cyberdyne packed full of his weapons and explosives.
these explosive barrels:
or this thing:
Granted I expect there'd be very limited interest in these.
Limited interest, perhaps, but those look like they'd be so fun to model and make!
Sent from my iPad using Tapatalk
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Ok, so a question for anyone following this thread... I am RARING TO GO on new stuff, especially since I am forced to wait for the first print of the grenade launcher. Olbertfrog gave me a list of his most desired weapons in 1:4 scale, and from those I figure there are 3 iconic ones... the SPAS-12, AR-18, and Colt Commando AR -15. They look SUPER FUN to model and make. Now, these are all available in 1:6 scale already, so I am thinking about these in 1:4 and/or 1:10. I also LOVE a-dev's suggestions on non-traditional accessories... SO, now my question...
Do you all feel it would be better to start a SINGLE thread for all the weapons/accessories and have a few lists where people let me know what they're interested in within the thread? Or should I start a separate list for the various weapons and accessories? Or a separate list for weapons, a separate one for accessories, etc... haha, I'm just not sure how to go about it. All I know is I am excited to model some more! Now I know things could get out of hand because we're talking 1:10, 1:6, AND 1:4 stuff here, so like I said, I'm just not quite sure how to go about it.
Let me know what you guys think.
Ok, so a question for anyone following this thread... I am RARING TO GO on new stuff, especially since I am forced to wait for the first print of the grenade launcher. Olbertfrog gave me a list of his most desired weapons in 1:4 scale, and from those I figure there are 3 iconic ones... the SPAS-12, AR-18, and Colt Commando AR -15. They look SUPER FUN to model and make. Now, these are all available in 1:6 scale already, so I am thinking about these in 1:4 and/or 1:10. I also LOVE a-dev's suggestions on non-traditional accessories... SO, now my question...
Do you all feel it would be better to start a SINGLE thread for all the weapons/accessories and have a few lists where people let me know what they're interested in within the thread? Or should I start a separate list for the various weapons and accessories? Or a separate list for weapons, a separate one for accessories, etc... haha, I'm just not sure how to go about it. All I know is I am excited to model some more! Now I know things could get out of hand because we're talking 1:10, 1:6, AND 1:4 stuff here, so like I said, I'm just not quite sure how to go about it.
Let me know what you guys think.
xenoviper
Super Freak
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Just do it within this thread would be fine. Maybe change the thread title once you commence other guns and accessories~
---------
btw please remove me from spot 13 of 1/6th scale as im already on spot 5 with x2
Just do it within this thread would be fine. Maybe change the thread title once you commence other guns and accessories~
---------
btw please remove me from spot 13 of 1/6th scale as im already on spot 5 with x2
Last edited:
rjszar
Super Freak
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
This thread will be fine.
This thread will be fine.
Davinator65
Freakazoid
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Interested in 1/6.
Interested in 1/6.
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Got you down.
So I decided to try again with the caster just to see what they said. Surprisingly, for being a company that does casting, the man I spoke with tells me he feels the mold would be exceedingly complicated, to the point of essentially telling me he wouldn't do it. Since I was considering casting myself anyway, I have been thinking about it, and I guess I am not seeing what he is seeing. I don't think it will be EASY, but for it to be so hard they won't even try... I was shocked.
So, once the piece comes in, I will play around with it a bit and see what I can come up with.
Got you down.
So I decided to try again with the caster just to see what they said. Surprisingly, for being a company that does casting, the man I spoke with tells me he feels the mold would be exceedingly complicated, to the point of essentially telling me he wouldn't do it. Since I was considering casting myself anyway, I have been thinking about it, and I guess I am not seeing what he is seeing. I don't think it will be EASY, but for it to be so hard they won't even try... I was shocked.
So, once the piece comes in, I will play around with it a bit and see what I can come up with.
Wce-jordon
Just a little freaky
- Joined
- Jun 21, 2016
- Messages
- 48
- Reaction score
- 0
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Ya man I need this they should have put this with BD dx terminator!! Will it come painted? And I can pay in full anytime just give me correct paypal address (via gift or payment) and is great! Your making 1/10 and 1/4 scale versions? Now I have every 1/4 terminator statue and all 3 enterbay figures but sadly there is no movie accurate versions of the figures or statues that I could use this for? Was curious what else guys are buying them in that scale for? Like for other figures?
I use my mini-gun/diffle bad/grenade launches/grenades/gloves from my BD enterbay arnie I use them on my clean enterbay arnie so I have 1/4 scale ***n dope ass arnie...but the BD version could use the grenade launcher itd be dope as hell but not screen accurate..meh who cares..I will think about it, how much are these bad boys??
Ya man I need this they should have put this with BD dx terminator!! Will it come painted? And I can pay in full anytime just give me correct paypal address (via gift or payment) and is great! Your making 1/10 and 1/4 scale versions? Now I have every 1/4 terminator statue and all 3 enterbay figures but sadly there is no movie accurate versions of the figures or statues that I could use this for? Was curious what else guys are buying them in that scale for? Like for other figures?
I use my mini-gun/diffle bad/grenade launches/grenades/gloves from my BD enterbay arnie I use them on my clean enterbay arnie so I have 1/4 scale ***n dope ass arnie...but the BD version could use the grenade launcher itd be dope as hell but not screen accurate..meh who cares..I will think about it, how much are these bad boys??
Re: Terminator 2 MM1 Hawk Grenade Launcher **FINAL RENDERS BEFORE PRINTING**
Still working on pricing as I am trying to finish getting the casting lined up. Still aiming for $50 or so for 1/6. Other scales to be determined... I'm currently getting all my references in line to start modeling the other weapons and accessories.
Still working on pricing as I am trying to finish getting the casting lined up. Still aiming for $50 or so for 1/6. Other scales to be determined... I'm currently getting all my references in line to start modeling the other weapons and accessories.
Similar threads
