Yes yesanticipation building.......
he will delivered
Clothing set [LIST CLOSED] 1/6 Accurate Indiana Jones Jacket
- Thread starter jagzz
- Start date
Help Support Custom One-Sixth Figures Forum:
he will delivered
Chi-te Hsin
Active member
- Joined
- Feb 22, 2021
- Messages
- 120
- Reaction score
- 117
Hi Jagzz I wonder will the tailor fix the position of the pocket? The latest prototype shows that the right pocket seems a bit too close to the edge (zip)Yes yes
Last edited:
Let me check to the tailor, it should be possibleHi Jagzz I wonder will the tailor fix the position of the pocket? The latest prototype shows that the right pocket seems a bit too close to the edge (zip)
Yup, if not possible I would think we just take as it is.. but I will ask, probably the pocket still can be revise a bit.
The schedule will not change.
I thought the tailor had all the measurements for the pocket position? If they’ve been followed properly then surely they don’t need adjustments?
corellianfive
Junior Member
- Joined
- Oct 10, 2015
- Messages
- 748
- Reaction score
- 672
was there not a finished, proto type with everything correct? Or are alterations just being made on the run? I'm confused now as to where we are at with this......
Chi-te Hsin
Active member
- Joined
- Feb 22, 2021
- Messages
- 120
- Reaction score
- 117
I personally don’t mind of waiting for more couple of weeks. I believe the first priority of this project is accuracy and then the timeline of delivery. The right pocket is the only thing we need to consider making adjustment, other parts of the prototype are all perfect now.
We are very close to the perfect ending as we all expected.
Last edited:
They have the measurement but somehow from the picture like Chi te Hsin point out it's too close, I think it's an easy fix.
If you follow the progress, everything assemble separately and tailor said that it's possible to adjust the pocket so I take his word on it.was there not a finished, proto type with everything correct? Or are alterations just being made on the run? I'm confused now as to where we are at with this......
Like I said before the adjustment that made only the pocket based on latest proto, that's it.
And this also will not effect the production timeline.
Based on my discussion with him, the adjustment doesn't effect the production timeline.I personally don’t mind of waiting for more couple of weeks. I believe the first priority of this project is accuracy and then the timeline of delivery. The right pocket is the only thing we need to consider making adjustment, other parts of the prototype are all perfect now.
We are very close to the perfect ending as we all expected.
As long as the adjustment is in accordance with the measurements and not a random re-placement.
.63 cm is the distance of the right pocket to the edge of the jacket in 1/6th... which matches the other side.
Last edited:
Ecklectic
Active member
- Joined
- Oct 6, 2018
- Messages
- 174
- Reaction score
- 109
Is there any chance we could get a picture of one of the latest jackets to see if all the previous suggestions have been incorporated? If the order is going to be finished at the end of this month then there must be at least one jacket finished.
The Rogster
Well-known member
Still no pickles!!
corellianfive
Junior Member
- Joined
- Oct 10, 2015
- Messages
- 748
- Reaction score
- 672
I don't even want to contemplate "the most accurate Indy jacket ever" being all finished for everyone and all the pockets being in the wrong spot, thus rendering it "not"the most accurate Indy jacket ever. That is too horrible to contemplate
takeshi
Freakazoid
- Joined
- Dec 22, 2012
- Messages
- 336
- Reaction score
- 52
That' what I have point out before, the most important things rather than on time is a final prototype should be show up before start the mass production.
The final proto we already shown before this, I will ask for new updates for the production piece.
So please wait for this.
Chi-te Hsin
Active member
- Joined
- Feb 22, 2021
- Messages
- 120
- Reaction score
- 117
Hey Wor-Gar, could you help me check if my concern about the position of right pocket is correct? Since you have done all the measurements for the jacket and the latest prototype seems like the two pockets are now same close the the edge as the red line shows on the picture which I posted below.
I’m not sure if that is the correct position or they should have different distance to the edge?
Just want to make sure my concern won’t led us to the wrong place.
Attachments
Hey Wor-Gar, could you help me check if my concern about the position of right pocket is correct? Since you have done all the measurements for the jacket and the latest prototype seems like the two pockets are now same close the the edge as the red line shows on the picture which I posted below.
I’m not sure if that is the correct position or they should have different distance to the edge?
Just want to make sure my concern won’t led us to the wrong place.
There is a difference between the distance to edge of jacket between the two pockets because of the storm flap (indicated by the stitching running down the length of the jacket, the portion of leather that flaps over the zipper for those who don't know).
The measurements we are using (sent to tailor) are:
Right pocket: 1.5 inches (3.8cm) from the zipper to edge of jacket --- that equates to: .63cms in 1/6th
Left pocket: 1 inch (2.5cm) pocket to storm flap (the threaded line) - storm flap itself is additional 1.5 inches (3.8cm) = .63cms in 1/6th
So the difference between the two distances is the 1 inch (2.5cm) between left pocket and storm flap = .42 cm
In other words, the width of the storm flap should be the same as the distance between right pocket and edge of jacket.
I hope that makes sense. Clearly there is something that needs to be addressed and I know Jagzz is working on that now with the tailor to confirm the measurements of the distances. At this scale something being off just a centimeter can read very big.
Last edited:
Similar threads
